Kenze
Random Breathing Controller
Random Breathing Controller
Couldn't load pickup availability
The upgraded breathing controller has three modes of play: timing, looping, and start at any time. It gives you a brand new feeling and unique experience.
Product Description
1. Timing mode (countdown and automatic stop)
Operation method: The running time can be set in advance, and the A and B valves can be set to the same time period. The device will automatically stop after reaching the set time. Applicable scenarios: Suitable for games that require precise control of duration.
2. Cycle mode (intermittent opening/closing of valves)
Operation method: The time for valve opening and closing can be set in advance, as well as the number of cycles to control breathing. Applicable scenarios: Suitable for gameplay that requires simulation of breathing rhythm or periodic control to enhance immersion.
3. Rondom mode (instant control)
Function description: A period of time can be set, during which the valve is randomly opened or closed. Applicable scenarios: You can experience the unique experience of random breathing interruption and start.
4. Remote control mode (A/B key control)
Function description: The opening and closing of the valve can be manually controlled through the AB key of the remote contro. Applicable scenarios: Breathing can be manually controlled through the remote control.In the timing, cycle, and random modes, if you need to end early, you can use the remote controller to enter the remote control mode, which can interrupt all modes.
5.Diversified matching props
In addition to gas masks, the display-type breathing controller can also be matched with a variety of latex products such as vacuum beds, vacuum cabinets, whales, vacuum sleeping bags, head covers, etc.
6.RD40 threaded interface
Can be connected to various gas masks with locking ring design: installation is more free and direction is controllable. The controller body is universal for all gas masks on the market and is equipped with 2 pagoda heads, which can be connected to various breathing tubes. The controller air inlet valve can last for hours when closed.
Product Specifications
Material: PLA filaments (100% biodegradable)
Colors: Black
Size: 17*6.5*6.5cm
Battery life: Built-in lithium battery.
Accessories include: valve body, remote control, charger, adapter, universal plug.
RD40 universal screw interface
Precautions
This product is designed for fetish use only. Improper use or unauthorized modifications may pose significant risks to health and safety. It is strongly advised to always use the product under supervision and ensure the airway remains clear and unobstructed. Avoid excessively tight clothing or accessories. This multi-functional mask is not intended for military, civilian, or air pollution protection purposes. Do not close the threaded connections during use to maintain adequate ventilation.
Share
Controller is good, functions mostly as expected.
A dangerous quirk: if you are in a mode like cycle mode and the valves are closed they stay shut when you exit the mode. If you are in random mode and exit the mode the valves shut just from exiting that also. The safest way to exit program is to use the remote control to override the software to remote mode, or to switch off the controller power switch, as the valves are configured normally open for no power
After extensive testing of this device before using it in a scene, I found it to be severely flawed, to the point that I cannot recommend this product to anyone. This is primarily for the safety reason of that the device allows for a programmed operation to end with the valves in a closed state, which SHOULD NEVER HAPPEN. This is an extremely dangerous behavior of the device that it allows this to happen, and could result in death for someone who accidentally sets up a cycle to end with the valves closed.
In relation to the above, the device identifying the valves as "On" or "Off" can be misleading, leaving a user to wonder if "On" means 'Open', or if it means 'Actuated'. Clearer descriptors such as " Open" and "Closed" should be used.
Lastly on the topic of Safety, is that when you hold 'Esc.' to end a program and go back to the operation menu, both valves automatically close when leaving any mode except for Remote Control mode. This would cut off the air for anyone hooked to the device while someone else tries to switch modes, and while this can be avoided just by toggling the power off and on again to switch modes, it makes holding Esc. to end a mode to be impractical to impossible to use while the device is being used.
Other, more minor criticisms exist, such as Timer Mode being mostly useless when considering the subject's safety, because the programming only triggers once before ending. Cycle Mode might be better if it had an option to loop indefinitely and not just for a set number of cycles. Random Mode would be better if you could program two different intervals, one for max time the valves are closed for, and a separate max time for how long until they close next. Remote Mode can't close both valves with a single button press and needs two to do it. Remote mode also has an odd flaw, where the first button press leaves the opposite valve closed. E.G. from a fresh power on, i press A on the remote to close valve A. This causes Valve A to stay open, and Valve B to close. So, if i press A again, this results in two closed valves instead. The device has expected remote operation after clearing this initial state entry condition. Lastly, the cooling fan in the unit only turns on if Valve A is closed, but not if Valve B is closed while Valve A is Open.
Despite operational criticisms, physical device construction is overall very good. Solid case, good power switch. I an very glad to see that the valves fail open in the event of power loss. Device internals are cleanly laid out. I would have preferred USB-C device charging vs a barrel jack however. I also would have preferred if the remote was more of a keyfob style one.
Overall, a device with a lot of promise, but the safety issues are too outstanding for me to recommend to anyone. Given 2 out of 5 stars, because I feel that this device could be great if those main three safety issues are addressed in another software revision.
Software hat noch so einige Fehler. ESC Taste braucht viel zu lange für einen Abbruch hinzu kommt das danach das Ventil geschlossen bleibt auf Endlos Zeit.
Nur durch das Ausschalten am Hauptschalter ist ein Sofort Abbruch möglich.
Das erste Programm ist sinnlos macht das selbe wie der Cycle Mode. Dafür fehlt ein Steigerungs Programm. Nach X runden plus Zeit dazu oder Reduzierung der Öffnung Zeit bis Minimum laut Einstellung erreicht ist. Zudem gibt es 1 Sekunde Abweichungen zu dem eingestellten Wert.
Beispiel alle 5 runden + 2 Sekunden Zu bzw Reduktion der ON Zeit um - 1 Sekunde.
on 8 off 5
Nach X runden
on 8-1off 5+2
Nach X runden
on 7-1 off 7+2
Und so weiter bis X Runde max
Zur Fernbedienung es ist nicht möglich beide Ventile gleich Zeitig zu schließen oder zu öffnen. Es ist nur hinter einander möglich.
I loved the robust packaging and delivery to EU using YunExpress, which made importing stuff way easier than using regular postal services.
Device itself works well, however there are some settings that may get stuck in locked state.
For solo play just use random mode with relatively reasonable time (20-30s) and you should be fine.
good look, good quality